Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Check that all connections are correct.
Connect the power supply unit to the
mains; the displays shows the software
version of the push-button panel for 3
seconds followed by " ACI FARFISA /
press < > (< > in alternate mode).
Dial the user number, check that the
number is correct on the display " dialling
/ ----" and press
to make the call. The
tone and the text " calling / ---- " confirm
that the call has been made.
In case of error press
sending the call) and dial the correct
number.
If the number is busy or if the number
does not exist the display shows " busy /
" for 3 seconds.
If the number exists you hear the ringing
tone and the display shows " ringing / ---
-".
You can select the internal station from
the names in the list. Press
search for the internal station and press
to send the call.
The called intercom rings for about 25
seconds.
The called user picks up the handset to
interrupt the call and enables the
conversation with the external station for
60 seconds. The display shows
" connection /---- ".
"Dialling"
s
ELEZIONE
1234
1 A
2 B
3 C
4 D
5 E
6 F
7 G
8 H
9 I
0 J
or "Search"
R
G
OSSI
IOVANNI
1234
1 A
2 B
3 C
4 D
5 E
6 F
7 G
8 H
9 I
0 J
The text on the display starts flashing 10
seconds before conversation ends. To
continue conversation for additional 60
seconds press
Press the intercom button to release the
door lock. Door lock activation time is 3
seconds (or 6 seconds).
Replace the handset to restore the idle
state.
Numbers that are not sent or deleted go
off after 25 seconds.
(only before
In installations with 2 or more digital
push-button panels, when a call is
made from one push-button panel, the
other push-button panels are deactivated
and their display shows "busy / ". Wait
until the line is free to make the call.
In installations with doorkeeper
exchanger in "Day" mode without direct
dialling function, all calls are sent to the
or
to
exchanger.
Once the call is received, the operator
can put the push-button panel on hold
and call the internal station; the push-
button display shows "hold-on / ".
If the operator connects the internal
station with the push-button panel, the
display returns to the conversation status.
The number displayed on the push-button
panel is the number of the internal station
called by the operator and it may not
correspond to the called number
because of the call transfer function.
again.
s
C
QUILLA
HIAMATA
1234
1 A
2 B
1 A
2 B
3 C
4 D
5 E
6 F
7 G
6 F
7 G
8 H
9 I
0 J
Door lock opening
The door lock can be opened from the
push-button panel, including in "busy"
mode, by dialling one of the 16 4-digit
codes you have entered.
Door lock activation
- Dial 00
- Press
; the display shows " Password
/
"
- Dial the personal access code within
10 seconds; each digit is visualised
with * instead of .
- Press
to release the door lock; you
hear the confirmation tone and the push-
button panel returns to the current
system operation mode (free or busy).
1234
3 C
4 D
5 E
8 H
9 I
0 J
C
ONVERSA
1234
1 A
2 B
3 C
4 D
5 E
6 F
7 G
8 H
9 I
0 J
14
Mi 2293/1
Publicidad
