28/29
12. Cleaning
When work has been completed, both the run and the reboiler must be cleaned with the
appropriate thinner, in order to remove any remaining product.
Empty the product cup and pour in the thinner, fit and close the cup cover.
Operate the mechanisms and spray the thinner until the application is clean. Repeat the
operation as many times as necessary.
Remove any remains of product from the gun and cup with a cloth soaked in thinner.
Keep air gasket areas free of accretions and foreign bodies.
The air nozzle is a precision component. Any deformation, especially in the air outlet orifices,
may cause malfunctions in its operation and incorrect or deficient quality spraying.
If necessary, dip the air nozzle in thinner in order to soften the remains of product or dirt. Once
softened, blow the nozzle with compressed air until any remains of product and thinner are
eliminated.
Should it be necessary to remove the air nozzle, do this with an appropriate, soft object, with
great care and avoiding any marking or scratching.
Release the elastic ring that holds its components together.
Once disassembled, clean with thinner, using the cleaning brush supplied.
Do not use any hard or metallic object. The blocked orifices of the nozzle must not be cleaned
with a sharp or hard object under any circumstances.
Assemble the nozzle.
For automatic cleaning of the gun, tools and accessories used in the mixing and preparation
of the product to be applied, we recommend the use of SAGOLA washing machines.
IMPORTANT
The gun can be cleaned with thinners or detergents in a gun washing machine.
If you opt for this cleaning system, we advise you to remember the following considerations,
which, if not applied, may damage the gun and render the warranty null and void.
- Do not submerge the gun in solvent or detergents longer than the time required for cleaning.
- Do not use the gun immediately after cleaning has been completed.
- Ensure that there is no thinner or detergent inside and that it is completely free of these Other
cleaning systems can be used (ultrasound).
ENGLISH