Publicidad
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp. 120° - 140° F*
Max. hot water temp
Flow rate - 06123xx0
handshower
max. 2.0 GPM (7.6 L/min)
Flow rate - 06132xx0
handshower
max. 1.8 GPM (6.8 L/min)
* Please know and follow all applicable local plumb-
ing codes when setting the temperature on the water
heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• The 4-hole trim set requires rough 06646000
(not included).
• Protection against backflow is provided by a
check valve in the handshower elbow and by an
automatically resetting diverter.
• 06123xx0 only: The handshower is for use
with an automatically compensating valve rated
at 1.5 GPM (5.7 L/min) or less.
2
15 - 75 PSI
145 PSI
176°F*
• 06132xx0 only: The handshower is use with
an automatically compensating valve rated at
1.4 GPM (5.3 L/min) or less.
• This unit is not anti-scald. In Massachusetts, or
if required by local plumbing code, install an
approved remote pressure balance valve or
other approved anti-scald device.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product
in a safe place. The receipt is required should it
be necessary to request warranty parts.
Publicidad
