Dell PowerEdge R810 PowerEdge Manual Del Usuario página 8

Processor Settings Screen
Option
Virtualization
Technology
(Disabled default)
C States
(Enabled default)
Security Settings Screen
Option
Intel AES-NI
(Enabled default)
TPM
Intel TXT
(Disabled default)
New Post Messages
Message
System Memory Size:
XX.X GB, System Memory
Speed: XXXX MHz,
Voltage: 1.5V or 1.35V
TXT error occurred during
POST. TXT has been
disabled due to an error.
There was an error during
TXT SINIT ACM
invocation on the previous
boot due to an error
processing the Launch
Control Policy
CPU X Failed Initialization The system BIOS reports a processor with IERR failure
8
Information Update
All manuals and user guides at all-guides.com
Description
Set to Enabled for TXT security feature support.
NOTE:
Disable this feature if your system does not run
virtualization software.
When set to Enabled for power savings, the processor(s)
can operate in C6 and package C3e states.
Description
Displays status of Advanced Encryption Standard with New
Instructions.
Set to Enabled and Activated for TXT feature support.
Enables Trusted Execution Technology for security
improvement.
Description
Displays the amount of system memory, system memory
speed, and current system memory operating voltage.
The configuration is not setup properly or does not
support the TXT feature.
Displays when there is a policy integrity failure in the
trusted boot environment launch control policies.
or processor that is present but fails initialization.