Sony SU-WL850 Información De Instalación página 19

2
Attach the Wall-Mount
Attachment (supplied with the
TV or LCD Monitor) to the rear of
the TV or LCD Monitor (to make
it parallel with the wall).
1.5 N·m
VS
{15 kgf·cm}
Note
 Be sure to fasten the Wall-Mount Attachment when
attaching them to the TV or LCD Monitor.
Use only a flat head screwdriver to install the
Wall-Mount Attachment. Use of another tool might
result in over torqueing the Wall-Mount Attachment
and damaging the TV or LCD Monitor.
3
Attach .
WM3
4
Attach the
WM2
LCD Monitor using
WM2
M6
WM3
to the TV or
.
M6
− 19 (GB) −
5
Detach the Table-Top Stand
from the TV or LCD Monitor.
 Remove one side of the Table-Top Stand
at a time. Firmly hold the Table-Top
Stand securely with both hands while
the other people lift up the TV or LCD
Monitor.
 Repeat the previous step and remove
the other side of the Table-Top Stand.
Note
 Three or more people are required to detach the
Table-Top Stand.
 Be careful not to use excessive force while detaching
the Table-Top Stand from the TV or LCD Monitor as it
may cause the TV or LCD Monitor set to fall resulting
in personal injury or physical damage to the TV or
LCD Monitor.
 Take care when handling the Table-Top Stand to
prevent damage to the TV or LCD Monitor.
 Be careful when lifting the TV or LCD Monitor as the
Table-Top Stand is detached, the Table-Top Stand
may topple over and cause personal injury.
 Take care when removing the Table-Top Stand from
the TV or LCD Monitor to prevent it from falling over
and damaging the surface that the TV or LCD Monitor
is sitting on.
GB