Tabla de contenido
Publicidad
m
aIntenance
ROUTINE MAINTENANCE
Lime and overly aggressive detergents may over
time make the surfaces of the tub opaque, but with
simple polishing it is possible to restore the original
brilliance of the material:
-
Put some automobile polishing compound on a
soft cloth.
-
Rub the surface with a circular movement, press-
ing fairly hard.
-
Complete the operation by wiping with a clean
cloth.
-
Never use powder detergents.
Liquid detergents may be used if they are free of
alcoholic substances.
-
Never use products such as ammonia, acetone,
alcohol and the like because they may perma-
nently damage the tub.
TUB CLEANING
For the Air System VE08P1, the pipe system is sani-
tized. This consists of automatically drying the pipes
for 30 seconds after 10 minutes from blower shut-
down. You can stop the drying cycle at any time.
SPECIAL MAINTENANCE
(not included for Soft tub, contact our Service
Centres)
Scratches, deep cuts and even surface cigarette
burns can be removed, thus restoring the original
appearance of the tub, by performing the following
actions.
14
TT0283385_02_SOFT_CMYK.indd 14
Damage must be evaluated for its severity and repairs
must be carried out in steps:
I. If the scratch or damage is particularly deep
(<0.5mm), start by sanding the zone when dry
(work on a larger surface than the damaged
area in order to avoid unsightly dips), using 400
sandpaper wrapped around a polystyrene block,
moving it with a circular motion.
II. For less serious damage, the dry repairs can be
started using 600/800 sandpaper.
•
In both cases, the work must be finished by sand-
ing in a circular movement, using 1000 sandpaper
dampened with water.
•
Polish the area with cotton and automobile pol-
ishing compound, using slight pressure.
This work must be performed delicately and gradually
so as not to remove too much material from the
thickness of the tub, thus causing damage.
Note:all of the previously mentioned mainte-
nance is to be considered as valid only for sur-
faces which were originally glossy.
For opaque surfaces, evaluate the type of inter-
vention based on the severity of the damage.
You can contact one of our service centres to
purchase a series of products which are suit-
able for the cleaning and maintenance of your
whirlpool tub.
5-07-2010 16:34:01
Publicidad
Tabla de contenido
