Attach The Front Brake Cable - Mongoose Netflix Stranger Things El Manual Del Propietario

3 Assembly

ATTACH THE FRONT BRAKE CABLE

WARNING!
Failure to properly set the brakes may result in the inability to
stop the bicycle movement and cause serious injury or death.
Be sure the brakes are functioning properly before using the
bicycle.
If the brakes are not attached follow these steps:
❶ Rotate the cable adjustment barrel and cable nut until the
slots are aligned with the slot on the brake lever body.
Figure 3.21
❷ Press the brake lever towards the grip.
❸ Slide the brake cable through the slots and place the cable
head into the brake lever. Figure 3.22
❹ Release the brake lever. Figure 3.23
❺ Lightly pull on the cable and rotate the cable nut and cable
barrel so they are no longer aligned.
Note: See Section 4: Adjusting the Brakes if adjustments
are needed.
26
Cable adjustment
barrel slot Cable nut slot
1
Brake cable slot
3
Brake cable
5
2
Brake lever
Figure 3.21
Cable head
Figure 3.22
4
Figure 3.23