Mongoose Netflix Stranger Things El Manual Del Propietario página 32

3 Assembly
Bolted Seat Clamp with Pivotal Seat (optional)
❶ Using a 5 mm Allen wrench, loosen the seat clamp bolt and
insert the seat post into the seat tube. Figure 3.29
❷ Adjust the seat height up or down until the rider feels they
have control of the bicycle and are comfortable.
Important! Be sure the minimum insertion marks do not go
past the top of the seat clamp and are not visible. See
Section 1, Fig. 1.2: Seat Height and Handlebar Reach.
❸ Tighten the seat clamp bolt to lock the seat in place.
❹ Remove the cover on top of the seat.
❺ Using a 6 mm Allen wrench loosen the seat bolt until the
seat moves freely.
❻ Adjust the angle of the seat until the rider feels comfortable
and is still able to control the bicycle.
❼ Tighten the seat bolt and lock the seat in place. Replace the
cover on the seat.
❽ Check the seat to be sure it does not move.
30
4
Remove cover
5
6
Figure 3.29