Maintenance - JANE Montecarlo Manual De Instrucciones

MAINTENANCE

Do not expose the cover to sun for extended periods. While
the seat is not in use, cover it or store it in the boot.
Wash the plastic parts in warm soapy water and dry the
components carefully afterwards.
The cover can be removed for washing. Follow the instructions
below:
To remove the cover of your MONTECARLO seat:
Headrest. Remove the 2 buckles under the sides, pull the
cover forwards and finally, remove the two upper buckles.
(5a).
Backrest. Undo the two rear straps, the buckles on both
sides and pull the cover forwards (5b).
Booster cushion. Lift the cover by the rear and pull it over
the front (5c).
For your safety and the good conservation of this product, it
is important to bring it to one of our official workshops for
regular inspections.
Wash by hand at a temperature never above 30°C.
To reassemble the cover, follow the same steps in reverse order.
5A
5C
5B
21