GIRO
GB
360
Step 5: Tighten the vehicle seat belt by first pulling the lap belt section and then the diagonal part in
the direction shown in the diagram. Make sure that the vehicle seat belt is not twisted.
Attention: Only the upright reclining position (position 1 facing forwards) is suitable for group II and III.
CLEANING AND MAINTENANCE
These instructions are important; read them carefully and keep them for future reference.
Remove the harness system.
Take the cover off the seat.
To replace the seat, follow the manufacturer's instructions.
Important: The cover is a safety accessory. Never use the child safety seat without the cover. Do not
put your child's safety at risk by using replacement covers from other manufacturers, as this could
mean the safety seat does not protect the child as it should.
CARE INSTRUCTIONS:
The cover can be taken off and washed at 30 ºC. It can be dry cleaned.
30ºC
Do not
Machine
use
wash in
bleach
cold water
If in doubt, consult the manufacturer of the child safety system or the retailer.
WARRANTY
The warranty period starts on the date of purchase and is valid for a period of 24 months. The warranty
is only applicable to material and production defects. The date of purchase can only be proven with the
original sales receipt. This warranty is only applicable to the original owner and is not transferable. The
warranty is only applicable to products that have not been altered by the user in any way. In the case of
any defects, the owner is required to return the product to the retailer.
The manufacturer is not responsible for any damages other than those to products supplied or
manufactured.
O
P
Dry clean any
solvent except
Trichloroethylene
Do not
Do not
tumble dry
iron
23