Fan Assembly; Attachment Of Motor Housing; Blade Assembly - Craftmade WarPlanes WB242 Guia De Instalacion

6. Fan Assembly.

Carefully push wiring and wire nuts into
outlet box.
Align 4 holes in bar at top of motor assembly
with 4 holes in hanging bracket. Secure
motor assembly to hanging bracket with 4
motor mounting screws and lock washers
that were previously removed (page 3,
Section 4).
[Note: It is extremely important to tighten the
screws so that fan can be mounted securely.]

7. Attachment of Motor Housing.

Raise motor housing to hanging bracket to
align screws on internal top rim of motor
housing with slotted holes on hanging
bracket. Twist motor housing to lock.

8. Blade Assembly.

Time Saver: Washers for blade screws can be set
on each blade screw prior to installing blades.
Locate 6 blade attachment screws in one of the
hardware packs. Align blade holes with motor
screw holes, turn blade so that the 3 small holes
on each outer edge of blade are facing up towards
the ceiling, and attach blade with blade screws.
[Note: Use slot located on switch housing plate
for easy access to motor screw holes.] Before
securing screws permanently, repeat with the
other blade . Secure all screws with a Phillips
screwdriver.
Note: Tighten blade screws twice a year.
All manuals and user guides at all-guides.com
hanging
bracket
slotted holes
page 5
"bar"
motor assembly
screws
motor housing
hanging bracket
motor housing
blade
switch housing slot
blade attachment
screws and washers