Repeat Playback; Counter Reset; Tape Position Indicator; Next-Function Memory - JVC HR-S8006UM Manual De Instrucciones

16
EN
1
4
7
0000
1
REW
STOP
PLAYBACK AND RECORDING FEATURES (cont.)
PAUSE
– – : – –
2 3
2
5 6
8 9
0
4
FF
PAUSE

Repeat Playback

START REPEAT
1
Press and hold PLAY (until " " blinks on the front
display panel) during playback, then release.
The entire tape is played back 50 times.
STOP REPEAT
JOG
SHATTLE
2
To stop, press STOP or STOP/EJECT at any time.
NOTE:
Pressing PLAY , REW , FF , PAUSE or
Repeat Playback.

Counter Reset

RESET COUNTER TO ZERO
1
Press 0000.
NOTE:
By pressing – –:– – , you can change the display to show
the counter reading, channel number, clock time or
tape remaining time. (Channel number is not displayed
during playback.) If "SUPERIMPOSE" is set to "ON" , the
superimposed indication will appear on the TV screen
( pg. 19).

Tape Position Indicator

The Tape position indicator
appears on screen when, from the
stop mode, you press FF or REW,
or use the SHUTTLE ring, or
perform an Index Search. The
position of " " in relation to "B"
(Beginning) or "E" (End) shows you
where you are on the tape.
NOTES:
"SUPERIMPOSE" must be set to "ON", or the indicator will not
appear ( pg. 19).
It may take a few seconds for the Tape Position Indicator to be
displayed.

Next-Function Memory

The Next Function Memory "tells" the VCR what to do after
rewinding. Before continuing, ensure that the VCR is in stop
mode.
a– For Automatic Start Of Playback After Tape Rewind . . .
. . . press REW, then press PLAY within 2 seconds.
b– For Automatic Power Off After Tape Rewind . . .
. . . press REW, then press
c– For Automatic Timer Standby After Tape Rewind . . .
. . . press REW, then press ‰ ‰ ‰ ‰ ‰ within 2 seconds.
NOTE:
It is not possible to select the Automatic Timer functions if the
cassette's record safety tab is removed.
or also stops
+ + +
B
COUNT –1:23:45
within 2 seconds.
E