Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
(Original instructions)
To select forward rotation, push the forward/reverse slider
(3) to the left.
To select reverse rotation, push the forward/reverse slider
to the right.
Warning! Never change the direction of rotation while the
motor is running.
Setting the drilling depth (fi g. C)
Press in the depth lock button (8).
Set the depth stop (7) to the desired position. The maxi-
mum drilling depth is equal to the distance between the tip
of the drill bit and the front end of the depth stop.
Release the depth lock button.
Switching on and off
To switch the tool on, press the variable speed switch (1).
The tool speed depends on how far you press the switch.
As a general rule, use low speeds for large diameter drill
bits and high speeds for smaller diameter drill bits.
For continuous operation, press the lock-on button (2) and
release the variable speed switch. This option is available
only in forward (clockwise) rotation.
To switch the tool off, release the variable speed switch.
To switch the tool off when in continuous operation, press
the variable speed switch once more and release it.
Accessories
The performance of your tool depends on the accessory used.
Stanley Fat Max and Piranha accessories are engineered to
high quality standards and designed to enhance the perfor-
mance of your tool. By using these accessories you will get
the very best from your tool.
Maintenance
Your Stanley Fat Max corded/cordless appliance/tool has
been designed to operate over a long period of time with
a minimum of maintenance. Continuous satisfactory opera-
tion depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
switch off.
Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
6
Regularly open the chuck and tap it to remove any dust
from the interior (when fi tted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fi tted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal in the new
plug.
Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fi tting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Protecting the environment
Separate collection. Products and batteries
marked with this symbol must not be disposed of
Z
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at www.2helpU.com
Technical data
Input voltage
V
AC
Power input
W
No-load speed
min
-1
Impact rate
min
-1
Impact energy per
stroke according to
J
EPTA-Procedure 05/2009
Max. drilling capacity
Concrete
mm
Steel
mm
Wood
mm
Weight
kg
Level of sound pressure according to EN 60745:
Sound pressure (L
) 90 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L
) 101 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Hammer drilling into concrete (a
) 16.3 m/s
, uncertainty (K) 1.5 m/s
2
h, HD
Chiselling (a
) 13.5 m/s
, uncertainty (K) 1.5 m/s
2
h, Cheq
KFFMED500 (Type 1)
230
750
0-1050
5,200
1.8
26
13
30
2.3
2
2
Publicidad
Tabla de contenido
