Sonoff D1 Manual Del Usuario página 7

SONOFF TECHNOLOGIES CO., LTD.
4. Power on
After powering on, the device will enter the quick pairing mode (Touch) during the
first use. The connected light enters the "breathing mode".
It will exit the quick pairing mode (Touch) if the device is not paired within 3mins.
If you need to enter this mode again, please power off and restart the device until
the connected light enters the "breathing mode".
5.
Add the device
Tap "+" and select " Quick Pairing ", then operate following the prompt on the app.
Pairing method for the device and SONOFF RM433
remote controller:
Short press any button on the RM433 remote controller within 5s after powering on
until you hear "Bi", which indicates all buttons are paired successfully.
The RM433 remote controller is not included, please purchase it separately.
Add
Device
Quick
Pairing
WIFI
devices
can
be
added
in
this
mo
de(make
sure
the
device
is
in
pairing
mode).
Scan QR code
GSM devices and devices with QR co
de can be added in this mode.
Sound Pairing
Add device in this mode if your
devic e support this feature.
<
RM433
6
English