Clamping The Pipes Or Fittings - geberit UNIVERSAL Manual De Operación

5
Place the pipe support prisms with cams on
the support rail and fix them in place. If
applicable, place the swivel support onto the
support rail and fix it in place.
18014405647374603-1 © 10-2020
996.254.00.0(07)

Clamping the pipes or fittings

1
Set the pipe support prisms to the required
dimension.
2
Fold up the brackets of the tension devices
and insert the parts to be welded.
The pipes or fittings must be inserted in
such a way that the ends to be welded
protrude 1 cm from the tension devices.
EN
25