SHELVES
Attach the shelves at the desired location with
4 screws as shown.
SHELF
IMPORTANT
Keep keys and your combination number in a
secure place, away from children. Keep this
record of your serial number and combination in
a secure place separate from your safe. To order
a replacement key set, follow the instructions on
the attached form.
STACK-ON PRODUCTS CO.
P.O. BOX 489, WAUCONDA, IL 60084
© 2018
STACK-ON PRODUCTS
SCREWS
MAINTENANCE
Tools Required:
Phillips screwdriver
5mm Allen wrench
If the door of the safe starts to rub on the door
frame, open the door per the instructions.
Loosen phillips screw on the side of the top and
bottom hinges to release the set screw
as shown below.
Use an Allen Wrench to tighten or loosen the
set screws located on each door hinge.
Realign the door vertically as necessary
as shown below.
Tighten phillips screws to secure set screws.
DO NOT OVERTIGHTEN
PHILLIPS
SCREW
SET SCREW
40800-1803
5 14