GM 19170528 Guia De Inicio Rapido

Chrome Fuel Door
Kit Contents:
Item
Chrome fuel door assembly
Bolt Screws
'U'-nuts
Instruction sheet
Tools Required:
T30 Torx Driver
Electric Drill
BEFORE YOU START:
· Read all instructions prior to starting.
FASTENER NOTICE: Use the correct fastener in the correct
location. Replacement fasteners must be the correct part
number for that application. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces.
These coatings affect fastener torque and joint clamping force
and may damage the fastener. Use the correct tightening
sequence and specifications when installing fasteners in order to
avoid damage to parts and systems.
Chrome Fuel Door
ALL IN FORMATION WI THIN DATE
ABOVE BORDER TO BE PRINTED
05FE08 In
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
18AP08 R
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
Quantity
1
2
2
1
REVISION19170528_001_001_04_18_2008_n AUTH
Removal of existing fuel door assembly:
1. Open fuel door.
2. Remove two T30 head screws (1) holding the fuel cup
housing (2) in place.
3. Unscrew gas filler cap.
4. Remove fuel cup housing (2).
FIGURE 1A
5. Reinstall gas filler cap.
6. Drill out existing rivets (1) holding the fuel door hinge in
place. Use a sharp drill to ensure proper alignment.
7. Remove the fuel door assembly (2) by sliding the assembly
towards the rear of the vehicle.
8. Remove tether from existing fuel door hinge.
FIGURE 2A
REV 18AP08
PART NO.
DR
TITLE INSTALLATION INSTRUCTIONS
PART NO.
19170528
6200 Grand Pointe Dr., Grand Blanc, MI 48439
2
19170528
SHEET
Fuel Door
1
SHEET
1
2
1
1 6
OF
6
OF