Changing The Dust Bag - Siemens VS06G Serie Instrucciones De Uso

When the work is done
*
To release the connection, press the unlatching sleeve
and pull the handle out.
* Depending on equipment level
*
To release the connection, press the unlatching sleeve
and pull the telescopic tube out.
* Depending on equipment level
30
en

Changing the dust bag

*
Replacing the dust bag
If the dust bag change indicator is completely yellow
when the floor tool is lifted from the floor and the
highest suction power is selected, the dust bag must
be changed, even though it may not yet be full. In this
case it is essential to change the dust bag due to the
type of material it contains.
The nozzle, suction pipe and flexible tube must not be
blocked, as this would also lead to dust bag change
indicator being triggered.
The handle can easily be detached from the hose to
remove blockages.
* Depending on equipment level
Open the lid by moving the locking lever in the
direction of the arrow.
Seal the dust bag by pulling the sealing strip and then
remove it.
en
31