Publicidad
Idiomas disponibles
Idiomas disponibles
3d. Using a 10mm socket, remove (1) plastic hex nut from wheel well liner.
3e. Using a 1/8" drill bit, drill out the center of (4) rearmost plastic rivets
holding the wheel well trim. Using a trim panel tool remove remaining
rivet heads.
3g. Using an 8mm socket, remove (2) screws from behind wheel well trim.
3f. Using a trim panel tool gently remove the lower part of the wheel well
trim to expose (2) screws holding fascia.
©2018 Horizon Global™ Corp - Printed in Mexico
Sheet 7 of 33
76226NP
03-23-18
Rev. A
Publicidad
