Controls - RIDGID micro LM-100 Manual Del Usuario

micro LM-100 Laser Distance Meter
Batteries .......................................(2) AAA
Auto. Laser Switch-Off..................After 30 Seconds
Auto. Shut-Off ...............................After 3 Minutes of Inactivity
Dimension ......................................115 x 48 x 28mm
Weight...........................................0.2kg (7oz)
Features
• Area, Volume Calculations
• Indirect Measurement
• Addition/Subtraction
• Display Illumination and Multi-line Display
* Range is limited to 50m (164 ft.) Use a commercially available target plate to
improve measurement ability during daylight or if the target has poor reflec-
tion properties.
**In favorable conditions (good target surface properties, room temperature) up
to 10m (33 ft). In unfavorable conditions, such as intense sunshine, poorly re-
flecting target surface or high temperature variations, the deviation over dis-
tances above 10m (33 ft) can increase by ±0.15mm/m (±0.0018 in/ft).
Figure 1 – micro LM-100 Laser Distance Meter
6
(4 / " x 1 / x 1 / ")
1 7 1
2 8 8
• Continuous Measurement
• Min/Max Distance Tracking
• Beep Indication
Ridge Tool Company

Controls

ON/Measurement
Button
Area/Volume
Button
Continuous
Measurement
Button
Addition
Button
Memory
Button
Measurement
Reference Point
Button
Figure 2 – micro LM-100 Buttons
Indirect
Measurement
Button
Subtraction
Button
Backlight/Unit
Change Button
Clear/Power
OFF Button