Manfrotto MVG460 Instrucciones página 7

(3) Insert the secondary quick release plate
and press down. The secondary quick re-
lease plate safety lock automatically locks
and locks the secondary quick release
plate safety lock.
Insert the secondary quick release plate.
5
Gimbal Balancing
⚠
Before balancing the gimbal, lock the gimbal to the balance lock state at first,
unlock each axis positioning lock in stages during the balancing process.
TIPS
(1) Before balancing the gimbal, the lens cover should be removed from the camera
and the memory card needs to be inserted to the camera to complete all the
connections to ensure that the camera is ready for shooting.
(2) During balancing the gimbal, make sure the camera is powered off and the
gimbal is turned off.
(3) If you add accessories after the balancing is completed, Gimbal will need to be
re-balanced.
(4) Install the lens support frame to
ensure that the lens holder can hold
the lens firmly.
7
5.1 Balance Adjustment of the Tilting Axis
(1) a. Unlock the tilt axis positioning lock ①, place the camera lens vertically upwards,
determine the camera's center of gravity.
b. Loosen the sliding arm lock screw ②, slide the sliding arm
position.
c. Tighten the sliding arm lock screw ②, if the camera lens can stay vertically upwards
that means balanced.
(2) a. Place the camera lens vertically upwards, determine the camera's center of
gravity.
b. Unlock the quick release plate safety lock ①, balance the camera position.
c. Tighten the quick release plate safety lock
stays stable, it means balanced.
③ to balance the camera
① and tilt the camera up or down, if it
GB