Alarm Indicators - Olympia NC 451 Manual De Instrucciones

Alarm Indicators

Alarms are indicated in the right-hand display [18] by
means of code numbers. ALARM [19] appears in the
display.
Code No. Cause
EE1
Critical bank note has been detected.
Too little or no ultraviolet reaction from
the bank note.
EE2
Critical bank note has been detected.
Too little or no magnetic reaction from
the bank note.
EE4
Bank notes detected as half bank notes.
The left/right-hand sensor for counting
the bank notes is soiled or damaged.
EE5
Doubled bank notes have been detect­
ed.
EE7
Bank note was drawn in askew.
EE9
The width of the bank note is more than
85 mm.
EEA
Chained bank notes
18
Solution
Remove the critical bank note from the output
tray [5].
Press the RESET button [13] to continue counting.
Remove the critical bank note from the output
tray [5] and check the bank notes for signs of
damage.
Press the RESET button [13] to continue counting.
Clean the sensor.
If the error continues to occur, refer to the informa­
tion in Chapter "Warranty".
Adjust the pressure exerted by the infeed plate.
Check whether the bank notes stick together.
Start the counting function again.
Lay the bank note in the infeed tray [4] again.
Press the RESET button [13] to continue counting.
Remove the critical bank note from the output
tray [5].
Press the RESET button [13] to continue counting.
Giu