Lotus SmarTime 50017/1 Manual De Usuario página 9

This product should not be worn when show-
ering or used in a sauna/steam room as it is
not possible to prevent steam entering the
watch. Any water damage to the product due
to non-compliance to this instruction will not
be covered by the warranty.
I. Functions
introduction
1.1 Buttons
Press the button to return to the Dial inter-
face from the Function interface; press the
button to turn on / turn off the screen when
on the Dial interface. Long press the button
to power on / power off the smart watch.
1.2 Charging Guide
Magnetic charging is as shown below. This
watch supports a PC USB or 5V charger. It takes
about 2 hours to fully charge the battery.
Simultaneous contact of the two pins of
the USB cable and the conductor may cause
a short circuit and may cause burning.
1.3 Shortcut function introduc-
tion:
1) Swipe from right to left on the dial inter-
face to enter the Data menu, which shows
steps, distance, calories. Swipe left again to
enter into the heart rate testing. Swipe left
again to enter the Sleep Monitoring function.
2) Swipe down to view certain shortcut func-
tions and settings.
3) Swipe from left to right for your daily noti-
fication history. Follow the instruction to set
up the Bluetooth connection between the
watch and the mobile phone in order to re-
ceive mobile phone notifications.
4) Swipe up to enter into the Menu interface:
here you swipe up and down to select any
functions. Tap to enter.
5) Long press on the DIAL interface to select
the DIAL, swipe left or right to select and tap
to confirm.
1.4 Notification
Connect the watch to the Lotus application
(hereafter APP) and once in the APP ensu-
re that the necessary mobile phone permis-
sions have enabled. The device can synchro-
nize the last 10 notifications from the mobile
phone.
1.5 Down slide menu
the DIAL interface to enter into this menu)
1) Date, Bluetooth connect status, power,
time.
2) QR code for APP (i).
3) Connect /disconnect the Audio Blue-
tooth.
4) Stopwatch.
5) Brightness adjustment.
6) Settings.
1.6 Telephone / Call records
1.6.1 Connect the watch "Audio BT" with
your mobile.
Click the "Telephone" icon to turn on/off the
Bluetooth calling. When the Audio Bluetooth
is turned on, it will be displayed in the mobile
BT menu. After the Bluetooth connection is
made you can use the watch to answer/hang
up the phone. Connect and disconnect the
Audio BT by swiping down from the watch
face and press the "telephone" icon. When
connected the symbol is blue.
(Slide down
9 9