Using The Appliance; Filling The Water Reservoir - Philips HD7751 Manual Del Usuario

All manuals and user guides at all-guides.com
8 Press the start/standby button to start the brewing process.
9 Let the appliance operate until all the water has flowed into the jug.
The coffeemaker produces 5 beeps when the brewing process is
,
finished.
10 Press the start/standby button to stop the brewing/ keep-warm
process.
11 Empty the jug.

using the appliance

Filling the water reservoir

1 Open the water reservoir lid and fill the water reservoir with the
required amount of cold water.
There are indications for 2 to 10 cups (275ml to 1375ml) on the water
level window and on the jug. You can use these indications to determine
how much water to put in the water reservoir. Keep in mind that the
amount of brewed coffee will be slightly less, since ground coffee absorbs
water.
Tip: Use the jug to fill the water reservoir with the required amount of water.
Note: Do not fill the water reservoir beyond the 10-cup indication, otherwise
water spills from the opening at the back.
using coffee beans
Always keep the water reservoir lid closed when you fill the coffee bean
container with coffee beans. Otherwise coffee beans can fall into the
water reservoir and block up the water inlet.
EnglisH
9