Webasto SmarTemp Control 3.0 Manual De Instrucciones página 5

SmarTemp Control 3.0
LCD Screen Symbol Legend – Air Heater
Main Screen
Heat Mode
Vent Mode
LCD Screen Symbol Legend – Coolant Heater
Mode (Auto or Manual)
Day / Time
Auto or
Manual
Mode
NOTE: When Auto is visible, timers
are enabled
Operation Using SmarTemp Panel
Heater ON Example
Press the Webasto button to turn heater on.
Set Temperature Output & Heater Runtime Example – Air Heater
Using the rotary dial and the selection button, follow these steps to set your cab temperature to 70°F
with a runtime of 4 hours.
1. Press the Selection button. Using the rotary dial, select: Duration > Timed > Then set your
duration to 4 hours. Confirm the adjustment by pushing the selection button.
2. From the main screen use the rotary dial to adjust the set temperature to 70°F; confirm the
adjustment by pushing the selection button.
NOTE: The set temperature can be adjusted quickly even when the heater is running using the same
method as above.
Heater Mode
Timer Start Day / Time
Timer Active
Ambient Temperature
Set Temperature
Runtime Remaining
Ambient Temperature
User Set Temperature
Runtime Remaining
Ambient Temperature
Fan Speed Indicator (Low –
Medium - High)
Current
Timer
Day
Active
Auto
Mode
Runtime Remaining
Mode Indicator
Heater ON
Mode Indicator
Fan ON
Auto Mode
Curren
t Day
Curren
t Time
Heater
ON
5
Installation - Operating Instructions
Vent Mode
Timer Start Day / Time
Ambient Temperature
Timer Active
Manual Mode
Manual
Mode
Runtime Remaining
Current
Day
Current
Time
Heater
ON