Installing Or Removing Battery Pack - Lumax LX-1182 Manual De Instrucciones

INSTALLING & REMOVING BATTERY PACK
TO INSTALL BATTERY PACK (LX-2182):
check to see that the Trigger-Lock Lever is not in a "flipped-up" position. For optimum weight distribution
and balance; align Battery Pack with opening in the Grease Gun Motor Assembly Housing and insert
the Battery Pack from the back. Slide the Battery Pack into Grease Gun's Motor Assembly Housing until
it locks in place.
Always switch off the tool before removal of the Battery Pack (LX-2182).
Depress the Red Release Button on the Battery and Slide-out Battery Pack out of the Grease Gun.
CAUTION:
To insert the Battery Pack, align the tongue on
the Motor Assembly Housing with the groove in the Battery
Pack and slide it into place. Always insert the Battery Pack
all the way until it locks in place with a little click. If not, it
may accidentally fall out of the tool, causing injury to you or
someone around you. Do not use force when inserting the
Battery Pack. If the Battery Pack does not slide in easily, it is
not being inserted correctly.
Prior to inserting Battery Pack or operating the unit, always
TO REMOVE
BATTERY PACK
15