Addendum To The Directions For Use, Software Versions 1.0X-1.7X; Advanced Settings - Welch Allyn Connex Vital Signs Monitor 6000 Serie Anexo A Las Instrucciones De Uso

Addendum to the directions for use,
software versions 1.0X–1.7X
This addendum supplements the following documents:
•
Welch Allyn Connex
•
Welch Allyn Connex
Before using the product, you must familiarize yourself with the sections of the directions for use
and this addendum that pertain to your use of the product.

Advanced settings

Specify patient ID settings
Patient identification appears on the Home tab in the Patient frame, and it is listed in various tabs,
such as the Patients tab and the Review tab.
1. Access the Advanced Settings.
a.
b.
c.
d.
The General tab appears.
2. Touch the Data Management tab.
3. Touch the Patient IDs tab.
4. Specify settings.
Setting
Name format
Primary label
Secondary label
Require patient ID to save readings
®
Vital Signs Monitor 6000 Series
®
Integrated Wall System directions for use (part number 104066)
Touch the Settings tab.
Touch the Advanced tab.
Enter the Advanced settings code.
Touch OK.
™
directions for use (part number 103730)
Action/Description
Select a format for all displayed patient names:
Full name or Abbreviation.
Select the primary identification label for all
displayed patients.
Select a secondary identification label for patients.
A secondary label displays only on the Home tab,
after the primary label.
Make entering a patient ID a prerequisite for saving
measurements. If they fail to enter an identifier, the
monitor prompts them when they try to save.
1