Features: Time Out - Pentair INTELLIFLO WHISPERFLO VSD Guia De Instalacion

21
Quick Clean
(Continued)
To access the Quick Clean menu:
1. Check that the green power LED is on.
2. Press the Menu button. "Settings" is displayed.
3. Use the Down arrow button to scroll to "Features".
5. Press the Select button. "Timeout" is displayed.
6. Press the Down arrow button. "QuickClean" is displayed.
7. Press the Select button. "Set Speed" is displayed.
8. Press the Select button. The "RPM" first (ones) column will highlight.
9. Use the Up or Down arrow button to change the speed.
10. Press the Enter button to save the setting.
11. Press the Down arrow button. "Time Duration" is displayed.
12. Press the Select button. The cursor will appear in the minutes column.
13. Use the Up or Down arrow button to change the time from 1 minute to 10 hours.
14. Press the Enter button to save the setting. Note: To cancel any changes, press the Escape
button to exit without saving.
15. Press the Escape button to exit.

Features: Time Out

This feature keeps the pump from running for a programmable amount of time. This feature can be
used to allow newly glued pipe joints time to dry before circulation of the pool water is resumed.
This feature keeps the pump from running for a programmable amount of time. When this feature's
time is up, the pump will be in the "Running Schedule" mode, Start/Stop LED will be lit and ready
to turn on at the next scheduled run time.
To access the Time Out menu:
1. Check that the green power LED is on.
2. Press the Menu button. "Settings" is displayed.
3. Use the Down arrow button to scroll to "Features".
5. Press the Select button. "Timeout" is displayed.
6. Press the Select button. "Timeout Duration" is displayed.
7. Press the Select button. The "Minutes" column will highlight.
8. Press the Left arrow button to scroll to the hours setting.
to 10 hours.
9. Press the Enter button to save the setting. Note: To cancel any changes, press the Escape
button to exit without saving.
10. Press the Escape button to exit.
Time out can be set from 1 minute