Replacement Parts; Polarized Plugs; Double Insulation For Safer Operation - Metabo HPT CC 14SF Manual De Instrucciones

English
WARNING
For Your Own Safety Read This Instruction Manual Before Operating The Cut-Off Machine.
1. Always wear eye protection, when using the tool.
2. Always keep hands out of the line of the cut-off wheel.
3. Never operate the tool without the guards in place.
4. Never perform any freehand operation with the tool.
5. Never reach around the cut-off wheel.
6. Always shut off the power and wait for the cut-off wheel to stop turning before adjusting or
maintaining the tool.
FOREWORD
The information contained in this manual is designed to assist you in the safe operation and
maintenance of the POWER TOOL. Some illustrations in this manual may show details or
attachments that diff er from those on your own POWER TOOL.

REPLACEMENT PARTS

When servicing use only identical replacement parts.
Repairs should be conducted only by a metabo HPT authorized service center.

POLARIZED PLUGS

To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider than
the other.) This plug will fi t in a polarized outlet, reverse the plug. If it still does not fi t, contact a
qualifi ed electrician to install a polarized outlet. Do not change the plug in any way.

DOUBLE INSULATION FOR SAFER OPERATION

To ensure safer operation of this electric power tool, metabo HPT has adopted a double insulation
system. "Double insulation" as used here, means a system of two insulations physically separated
and arranged between electrically conductive materials connected to the power supply and to
the outer frame handled by the operator. Therefore, the nameplate shows both the "
and "Double insulation" or either one on the power tool.
Although this system has no external grounding, you must still follow the normal safety
precautions given in this manual.
To keep the double insulation system eff ective, follow these precautions;
* To avoid lessening the double insulation-feature, always get in touch with your dealer or
an authorized metabo HPT power tool repair shop when assembling, disassembling or
replacing parts other than accessories or carbon brushes.
* Clean the exterior of the tool with a soft cloth moistened in soap water, and dry thoroughly.
Don't use chloric solvent, gasoline or thinner on plastic components; otherwise they might
dissolve.
6
" mark