Kohler Portrait K-2226 Guia De Instalacion página 4

2. Install the Lavatory
Drill 1/4" mounting holes at the marked locations on the finished
wall.
Install the faucet and drain to the lavatory according to the
manufacturer's instructions.
CAUTION: Risk of product damage. Do not overtighten the lag
bolts. Overtightening may damage the product.
Carefully set the lavatory on the hanger. Level the lavatory, and
carefully secure the lavatory to the wall with lag bolts and washers.
Tighten until snug.
Connect and tighten the trap to the drain, and complete the water
supply connections to the faucet according to the instructions
packed with the faucet.
Apply three self-adhesive gaskets to the bottom ribs of the lavatory.
Fit the shroud next to the wall so the flanges slide under the spring
clips. Adjust as needed for proper fit.
CAUTION: Risk of product damage. Do not overtighten the
mounting bolt. Overtightening may damage the product.
Attach the shroud to the angle bracket with the mounting bolt and
washer. Carefully tighten the mounting bolt.
1016187-2-A 4 Kohler Co.