TOUGHBUILT TB-H2-LM-165-BT Instrucciones De Funcionamiento página 18

To use Area Measurement Mode:
1. The Area Measurement Mode will be displayed
on the screen and the laser will be armed as
indicated by the Laser ON Indicator
2. The Length "L" Active Measurement and
corresponding Icon Arrow will blink until a
measurement is taken by laser-marking the
desired target, then pressing the Action
Button
3. After the new measurement is taken, the
Length Active Measurement, corresponding
Icon Arrow and Labels will briefly flash
yellow, then turn white. The first edge of
the Area rectangle is now defined.
4. The Width "W" Active Measurement and
corresponding Icon Arrow will blink until
a measurement is taken by laser-marking
the desired target, then pressing the Action
Button
5. After the new measurement is taken, the
Width Active Measurement, corresponding
Icon Arrow and Labels will briefly flash
yellow, then turn white. The second edge
of the Area rectangle is now defined. At
the bottom of the screen, the Area value
will appear, briefly flash yellow, then turn
white. The Save Arrow (Green, right-facing
arrow) will also appear.
6. To save the Area value, press the Right
Button
that the Area Measurement has been saved
and will be available in the Memory Menu.
7. To begin measuring a new Area, press
the Action Button
to step 2.
18
MODE
BLUETOOTH
UNITS
ZERO POINT
BRIGHTNESS
SOUND
LANGUAGE
MEMORY
3
.
3
.
L 0 0
0/32 IN
FT
W
L
W
+ 0.0°
2
. An overlay will appear displaying
3
. The screen will return
7
.