Publicidad
Idiomas disponibles
Idiomas disponibles
MODE
BLUETOOTH
UNITS
ZERO POINT
BRIGHTNESS
SOUND
LANGUAGE
MEMORY
To use Length (Calc.) Measurement Mode:
1. The Length (Calc.) Measurement Mode
will be displayed on the screen and the
laser will be armed as indicated by the
Laser ON Indicator
2. The Active Measurement will blink until a
measurement is taken by laser-marking the
desired target, then pressing the Action
Button
3. After the new measurement is taken, the
Active Measurement will briefly flash yellow,
then turn white. At the bottom of the
screen, the Length (Calc.) value will appear,
briefly flash yellow then turn white. The
Save Arrow (Green, right-facing arrow) will
also appear.
4. To save the Length (Calc.) value, press
the Right Button
displaying that the Length (Calc.)
Measurement has been saved and will be
available in the Memory Menu.
13
6
25/32 IN
FT
L
6
10
3/32 IN
FT
5. To take additional measurements, press the
Action Button
will be zeroed and blink; then return to step 2.
HEIGHT (CALC.) MEASUREMENT
This mode allows the user to laser-mark
a target and calculates the vertical height
between the unit and the target.
3
.
2
3
. The Active Measurement
L
7
.
. An overlay will appear
13
6
25/32 IN
FT
L
+
38.6°
23
Publicidad
