Error Messages - TOUGHBUILT TB-H2-LM-165-BT Instrucciones De Funcionamiento

8.
Problem
No Laser
Beam
The tool
clicks
inside
The screen
displays an
error code.

ERROR MESSAGES

Error
Code
ERR01
ERR02
ERR03
ERR06
When contacting ToughBuilt
Inc. for customer service or warranty
claims, please be aware that the
information on the registration form will
be required.
46
TROUBLESHOOTING
Possible Cause
Batteries are not
inserted
Depleted batteries
Incorrect battery
polarity
Corroded battery
terminals
Poor contact of the
ON button
This is normal
and is generated
by light-path
switchover during
measurement.
Please refer to the
error-messages
section.
Cause
The reflected laser
signal is too weak.
The distance to be
measured is beyond
the measuring
range. The specified
measuring range of
this instrument is
0.05 ~ 60 m.
The target at which the
laser beam is aimed is
weak at reflecting the
laser beam.
Low battery
Solution
Install 2 x AAA
alkaline batteries
Install fresh
batteries
Install batteries
observing polarity
Clean the battery
terminals
Press the button
harder or send the
unit for repair.
N/A
Please refer to the
error-messages
section.
Solution
Change the target or
affix a piece of white
paper to the target.
Measure within the
effective measuring
range.
Change the target or
affix a piece of white
paper to the target.
Install fresh batteries.
Industries,
®