Reset; Temperature Indicator; Power / Band; Clock Mode - SunTech RP-D10 Manual De Instrucciones

When the batteries become weak, battery indicator flashes.
If batteries get too weak for proper operation, the unit
will automatically shut off.
Replace the batteries immediately to prevent memories
losing after the power automatically turns off.
Turn off the unit and then replace the batteries with fresh ones
within 1 hour.

RESET

If the unit operates erratically, reset the unit by press RESET
inside the battery compartment to resume normal operation.
Note that reset will erase all of the memories including clock
setting.
1
0:00
LOCAL
WEEKDAY
1
Withdraw the batteries, press
RESET 2 inside the
compartment for above 0.5
second.
2 Install the batteries, clock
flashes and reset to 0:00.
4

TEMPERATURE INDICATOR

Press MEMO
temperature indicates in the display
for 5s.

POWER / BAND

1. FM
Press POWER / BAND
2
unit, the FM station you stoped listen
last operation is heard.
2. AM
Press POWER / BAND
unit turns into AM mode, the AM station
you stoped listen last operation is heard.

3. Clock Mode

Press POWER / BAND
unit turns off into Clock mode, weekday
indicates in the display.
Turn off the unit into Clock Mode if you do not want to listen
to the broadcast. It hardly consumes any power in Clock Mode.
when the unit is off,
8
4
to turn on the
4
in FM mode,
AM
in AM mode,
4
5
30 c
TEMPERATURE
STEREO
89.9
MHz
FM
1071
Khz
5
18:00
LOCAL
WEEKDAY