Clock Set; Adjust The Clock; 24H; Weekday - SunTech RP-D10 Manual De Instrucciones

CLOCK SET

1. Adjust the Clock

1
Press and hold STORE / TIME
5
18:00
LOCAL
into Clock Set mode when unit is off, ":"

WEEKDAY

in the clock indicator stops flashing.
2
Press +
and -
5
3
19:01
Press STORE / TIME
LOCAL
WEEKDAY
setting.
Make sure to press STORE / TIME
otherwise setting is failed.
In step 2, hour or minute will step up continuously if you
press and hold +
11
2. 12H / 24H
1
Press and hold MEMO and
8
+ together for above 2s
11
when the unit is off.
5
18:00
LOCAL
WEEKDAY
MEMO
9
to cyclically increase the hour
11
to cyclically increase the minute.
12
to store the clock
9
after clock setting,
9
or - until you release the button.
12
2
Clock mode indicates in the
display for a short time and
then clock with the new mode
shows in the display.
12H
5
6:00
LOCAL
PM
WEEKDAY
10
3. WEEKDAY
1
for 2s
When the unit is off, press MEMO
for above 2s until WEEKDAY
flashes in the display.
2
Press +
upward or -
3
Press MEMO
Make sure to press MEMO
otherwise setting is failed.

4. DUAL CLOCK

You can preset dual clock - CL1(local) and CL2 in the unit with
independent clock and weekday.
1
When the unit is off, press
+ and -
11
above 2s.
18:00
LOCAL
Repeat the same procedure to change the clock to CL1(Local).
8
to change the weekday
11
to downward.
12
to store the setting.
8
after weekday setting,
8
2
Clock number indicates in the
together for display for a short time and then
12
new clock shows in the display.
5
WEEKDAY
11
5
18:00
LOCAL
WEEKDAY
6
18:00
LOCAL
WEEKDAY
Cl2
6
2:00
WEEKDAY