Sound Quality Selection; Presetting Stations - SunTech RP-D10 Manual De Instrucciones

AM Reception
Magnetic antenna inside the unit
functions as AM antenna, it is
strongly effected by the reception
direction.
When listening to AM broadcast,
reorient the unit to find the
position which gives the best
reception.

SOUND QUALITY SELECTION

Set sound quality selection
position according to the receiving broadcast.
MONO/ ST/ BASS
MONO: weak signal broadcast, voice program, mono broadcast.
STEREO: strong signal broadcast, music, FM Stereo broadcast.
BASS: strong music broadcast, bass stereo.
When listening to a stereo broadcast, normally set
MONO/ST/BASS
If you are listening to the stereo music and prefer to a
bass effect, set the switch to BASS.
If the stereo reception is too weak or noisy, or you are
listening to voice program, set the switch to MONO.
to different
13
to STEREO.
13
8

PRESETTING STATIONS

You can preset up to 20 stations under the preset number (0-19)
on FM and 10 stations under the preset number (0-9) on AM:
FM 0-19 + AM 0-9 = 30 Presets
FM
PRESETS
BASS.STEREO.MONO
AM-FM STEREO RECEIVER
FM
FM
FM
If you do not have any operation in each step for 5s,
memory mode will automatically released and the station
is not preset into the unit.
If a station is already stored, the new station with the
same preset number replaces the old one.
1 Hour Power Auto off
After listening for 1hour, the unit automatically turns off to avoid
power wasting. If you want to continue listening, turn on the unit.
1
STEREO
Tune in to a desired station with
100.4
manual tuning or quick tuning .
MHz
Press STORE / TIME
6
2
STEREO
100.4
memory mode, preset number
MHz
flashes in the display.
3
Press MEMO
7
STEREO
100.4
preset number, preset number
increases cyclically pressing
MHz
MEMO
4 Press STORE / TIME
9
STEREO
100.4
memorize the station. The
corresponding number will
MHz
indicate in the display.
9
into
9
to select a proper
8
.
8
9 to