Eos Wireless converge Manual Del Utilizador página 10

Converge Transmitter
Operation
Volume Settings
Set the Volume on your computer or other external audio device AS WELL AS your software
based audio program (iTunes, Real Player, Windows Media Player...) to the Maximum Volume
Level. When using web based internet radio like Pandora, Last FM, YouTube... make sure that
the Volume level is ALSO set to the Maximum Level.
Powering up the Converge Transmitter
Once the Eos Converge Transmitter is connected to the USB port or external power supply,
press the POWER button on the top of the Converge Transmitter. The LED in the antenna mast
will illuminate as will the source LED confirming power.
Selecting Source
The default source is USB, press the source button to toggle between USB and AUX.
Windows Users
1. Plug your powered desktop speakers into the AUDIO OUT jack on the back of the
Converge Transmitter.
2. Open the Control Panel from the "Start" menu and select "Sounds and Audio Devices. "
3. Under the "Audio" tab, choose "Converge USB TX" for "Sound Playback. "
4. Set PCs Volume level to the Maximum Output Level.
Your PC's sound will now be output through the Converge Transmitter as well as the AUDIO
OUT jack.
NOTE- If no sound is output, restart iTunes or other software based audio playback program
(like Windows Media Player, Real Player...). If using web based internet radio like Pandora,
Last FM, YouTube... reload your the web page that is playing the audio content.
Macintosh Users
1. Plug your powered desktop speakers into the AUDIO OUT jack on the back of the
Converge Transmitter.
2. Open System Preferences and select "Sound" and Click on the "Output" tab.
3. Under the "Output" tab, select "Converge USB TX. "
4. Set Mac's Volume level to the Maximum Output Level.
Your Mac's sound will now be output through the Converge Transmitter as well as the AUDIO
OUT jack.
All manuals and user guides at all-guides.com
10