Stereo System - Non Usb Connection; Stereo System/Amplifier Connection - Eos Wireless converge Manual Del Utilizador

All manuals and user guides at all-guides.com
Converge Transmitter

Stereo System - Non USB Connection

By using the included power supply, the Converge Transmitter can function without
connection to the USB port of a computer.
A home stereo system may be connected by plugging in the supplied stereo headphone cable
to the jack on the Converge Transmitter marked AUX IN. The other end of the cable can be
connected to the headphone jack of the Stereo Receiver/Amplifier using a headphone jack
adapter (not supplied). Output from the stereo system will be broadcast to all Eos receiver/
speakers. In this configuration only the AUX IN function is supported.
Stereo System Connection
The diagram below shows the connection using the stand-alone, non-USB connection to a
stereo receiver/amplifier.
Note - When connected to the line output of a Stereo System, the Volume output from
the system has no effect on the output level of the Converge Transmitter.
TRANSMITTER
STEREO RECEIVER/AMPLIFIER
INPUTS OUTPUTS
9