Displays And Functions - Abus Secvest FUBE50000 Manual De Instalacion Y Uso

Installation and start-up | Displays and functions
4. Screw the back of the
housing to the wall.
5. Teach in the wireless control
panel (see chapter 'Read-in
process') and lock the cover
in place.

Displays and functions

Teach-in process
1. Set the Secvest to 'teach-in mode' (see installation instructions for wireless
alarm system) and send a teach-in signal from the wireless control panel to the
wireless alarm system.
2. The teach-in signal can be sent either by inserting the batteries or by activating
the tamper switch.
3. Once the teach-in signal has been picked up by the wireless alarm system, it
will emit two beeps and the incoming signal strength will be displayed.
4. Confirm the successfully completed teach-in on the control panel.
34