HURAKAN HKN KWSB-5 Guia De Inicio Rapido página 6

EN
The company thanks you for purchasing our production equipment.
It is recommended that you read the contents of this manual on the operation, installation, and
maintenance of the product.
The manual is intended to familiarize the user with the device and the principle of using the
product.
Read this manual carefully before using the product.
During the operation, carefully handle the product, do not allow mechanical damage to parts.
Keep the product clean.
A shelf for boards is used to store flat items (cutting boards) in utility rooms and warehouses.
1. Passport
2. The assembly shelf
Parameter name
Overall dimensions, no more than, mm
length L
width B
height H
The shelf has an all-welded fixed or folding structure. In a packed form it takes much less
space. Has 3 to 15 levels, each of which can withstand up to 5 kg. The shelf is made of
stainless steel entirely.
5. Preparing the product for operation. Operation procedure
The wall shelf is attached to the wall with screws, preferably on a moisture-resistant surface.
Maintenance and repair of the shelves is carried out by specially trained staff.
Regularly check the reliability of the shelves.
The manufacturer systematically works on improving the design of the products, examines the
experience of operation with consumers and will be grateful for suggestions aiming at
improving it.
The manufacturer reserves the right to make changes in the design of the products without
reflecting them in the operation manual of this product. The shelves service life is 10 years.
Each shelf is packed in corrugated cardboard.
7.1.Transportation of products can be executed on any mode of transport with observance of
measures of protection against atmospheric precipitation and mechanical damage in two tiers.
7.2. The product should be stored in the warehouse in a packaged state in a vertical position in
two tiers at a temperature of -30 to +40° C, at a relative humidity of not more than 80% at
20°C and in the absence of aggressive vapors in the air, harmful to the material of the product.
6
FOR BUYER'S INFORMATION:
Introduction
1. Use of the product
2. Delivery set
Name
3.Technical characteristics.
4. The structure and the operation principle.
6. Maintenance
7. Packaging, transportation and storage
Quantity
1
1
Norm
200±2, 600±2
250±1,5, 350±1,5, 360±1,5
250±1,5, 450±1