Sveon SDigital TV Serie Manual De Usuario página 30

SDT10100 - User Guide
PLAYBACK OF MULTIMEDIA FILES THROUGH THE FRONTAL SLOT
1. Make sure you have installed a 2.5"
SATA hard disk in the provided aluminum
case (hard disk is not included). If you have
not installed a hard disk inside, please read
carefully the previous page.
2. Insert the aluminum case inside the slot
located in the frontal panel of the unit.
3. Wait during the files loading process. Go
to the Main Menu to play the multimedia
files saved in the device. Add more files to
your multimedia library by purchasing more
compatible aluminum hard disk cases from
Sveon SStorage series.
Files playback through USB Host port
SDT10100 includes an USB Host port in the front panel of the device with direct playing function. Connect an USB
external devices through the USB Host port to play video, picture and music files directly from the device to your
TV without the needing to copy the files in advance.
Follow these steps:
1. Connect and external USB device through the USB Host port (memory stick or external hard disk).
2. Turn the device on and wait during the files loading process.
3. Go to the Main Menu to play the files saved in the external storage device.
Antenna Connection
To receive DVB-T signal you need to connect the device to the roof antenna. Please note you have to complete
the antenna connection as indicated in this section (you need two antenna cables):
1. Antenna connection between Roof Antenna and SDT10100 device
Connect one end of the antenna cable to the roof antenna connector and the other end to the "RF IN" connector
located in the rear panel of the device.
2. Antenna connection between SDT10100 device and TV
Connect one end of the second antenna cable to the antenna output located in the rear panel of the device ("RF
Loop Through") and the other end to the TV.
30
English
www.sveon.com