Batteries Installation; First Time Usage - Sveon SDigital TV Serie Manual De Usuario

Sintonizador tdt grabador y reproductor multimedia con sistema de disco duro extraíble
Ocultar thumbs Ver también para SDigital TV Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SDT10100 - User Guide

6.1 Batteries installation

The product includes the batteries you need for remote control usage. Please follow these indications to install
them properly inside the remote control:
• Take the cover out, put the AAA batteries inside (please check the correct position +/-) and close the cover
• This picture shows the correct way to install the batteries:
• Point with the remote to the front panel of the device.
• The remote control signal power is 5 meters from the receptor and it covers an angle up to 60 degrees.

8. First time usage

First time you connect the device to your TV, the following window will appear:
• Antenna setting: Select if the device feeds the antenna
(5V) or not.
Note: The default value is "Disabled". Select "Enabled"
if the device is connected to an active antenna which
amplifies the RF received signal.
• Select country: Select the country where you are going
to use the device. When you change the country, the
time zone is changed and the default frequency infor-
mation also changes.
• OSD Language: Select the language used to display
the text of the OSD menu.
• Audio language: Select the default audio language.
• Subtitles language: Select the default subtitles lan-
guage.
• LCN: Enables or disables the LCN system (Local
Channel Number).
Note: LCN is a number which identifies a channel; this
system is used in some European countries as United
Kingdom or France.
• GMT USAGE: This option enables or disables the time
zone upgrading. When it is in Enable mode, this infor-
mation is updated based on DVB-T signal
Note: There are some countries which are covered by
more than one GMT time area. Spain uses GMT+ (ex-
cept Canarias Islands, which uses GMT).
• Time Zone: This option allows you to modify the time
zone based on GMT.
• Set Date: If the GMT usage is disabled, you can set
the date in a manual mode.
• Set Time: If the GMT usage is disabled, you can set
the time in a manual mode.
Once you have set all these options, press red button to start an auto channel scan or press the green button to
scan the available channels in a manual mode.
32
English
www.sveon.com

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Sdt10100

Tabla de contenido