Channel Recording; System Upgrading - Sveon SDigital TV Serie Manual De Usuario

SDT10100 - User Guide
• Recording by pressing a button: Enables or disables
the recording option by pressing the "Rec" button of the
remote control. If this option is disabled, when you press
"Rec" button you need to enter the interval time of the
recording; this information has to be be entered in the
"Recording Time" field. If this option is enabled, when
you press "Rec" button the recording lenght will be the
same than the "Recording Time" value automatically.
• Recording Time: Choose the recording lenght
(between 15 minutes and 8 hours).
Note: The Timeshift function lenght depends on the ca-
pacity of the connected device where is saved the tem-
porarily file. It can not be changed by user.

9.5 Channel recording

SDT10100 allows you to set a schedule recording which starts automatically although the device is in Standby
mode. Once you set the schedule recording, press "Power" button of the remote control and the device enters in
Standby mode (the screen of the device displays a clock). One minute before starting the recording the device is
turned on automatically and displays the selected channel.
If you want to record a channel and watch another one,
press "Ok" button of the remote control during a recor-
ding and the available channels will be displayed (the
channel which is being recorded also appears).
Note: This option (to record a TV program and watch a
different one simultaneously) is only available in the
channels which are in the same frequency.

10. System upgrading

You can upgrade the SDT10100 system to enjoy improvements and new options.
Follow these steps to upgrade the device firmware:
- Copy the update file "SDT10100_XX.ssu" in an USB device.
- Connect the USB device to the USB Host port located in the front panel of the device.
- Select the option "System upgrading" in the Setup main menu. Select the update file saved inside the USB de-
vice.
Important. Please make sure during the firmware upgrade the USB device is not disconnected or the unit is not
powered off. It may cause serious damages to the device and it would void the product guarantee.
We strongly recommend to download the upgrade files only from our official website: www.sveon.com. If you have
any doubt please contact with our Technical Support service.
www.sveon.com
37
English