CSL 303455 Manual Del Usuario página 13

6. Establish Bluetooth connection (pairing)
1. Press the "Multi-functional button" for 5-8 seconds when switched off to
establish the connection. The "status LED" flashes alternately red & blue.
2. Enable the Bluetooth search on your mobile phone and open the Bluetooth
environment. Search and connect with "CSL-303455". The status LED
changes to blue and flashes after successful connection. If you need a
password, try "0000", "8888", "1111" or "1234".
3. You may use, e.g., the buttons "Multi-functional button"/"Volume +" and
"Volume -" on the headset. Use them as described under point 5 "Button
functions".
Please note that the headset has its own volume control, which can be set irre-
spective of the paired end device.
7. Connect with two devices at the same time (multipoint)
1. Connect the first device as described in chapter "6. Establish Bluetooth
connection" and switch off the Bluetooth function of the telephone.
2. Then press the "Multi-functional button" twice to switch back to pairing
mode. The "status LED" flashes alternately red & blue.
3. Enable the Bluetooth search on your mobile phone and open the Bluetooth
environment. Search and connect with "CSL-303455". The status LED
changes to blue and flashes after successful connection.
4. Then enable the Bluetooth function of the first telephone, click in the list of
paired Bluetooth devices on "CSL-303455" to establish the connection. The
headset is now alternatively connected to two telephones.
Note: Music can be played from only one device. If you want to play music from
the other device, you must pause or close the music from the previous device. The
sample principle also applied to calls.
English
13