Charging The Battery - Comet Spa CM 12 S FREE Manual Del Usuario

Aspiradora - aspirador de cenizas
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
DESCRIPTION AND ASSEMBLY INSTRUCTIONS
(see g. ① )
A Motor head
B Handle for the transport
C Shoulder strap*
D1 Main switch ON/OFF.
power 50%
D2 switch "MAX"
power 100%
D3 Led

CHARGING THE BATTERY

Plug the charger in and connect it to the vacuum cleaner using the socket (R1)
Note: if you press the main switch, suction does not start, because suction cannot be activated
during charging process.
RED
If you press the main
ON/OFF button and
the red LED ashes
for 10 seconds, this
means at battery.
Unplug the charger in and disconnect it to the vacuum cleaner :
the light will turn o .
The vacuum cleaner can't stay connected to the charger permanently.
RED
1
2
Then connect the
battery charger plug
to a power socket
matching the tech-
nical speci cations
of the appliance; the
red LED turns on.
F1 Metal exible hose (Ash suction)
F2 Metal straight lance (Ash suction)
H Straight lance (dry dust suction)
I
Extension tube (dry dust suction)
J
oor accessory brush (dry dust suction)
N Washable Filter (dry dust suction) (Ash suction)
Q Head on tank locks
R Battery charge , electrical charging cable
R1 Battery plug (Battery Li-Ion)
R2 Pipe union for blower function
S
Tank
T
Suction inlet
ORANGE
ARANCIONE
3 h - 3,5 h
60%
0%
When the orange LED
turns on, the battery
has reached 60% ca-
pacity after about 3
hours.
GREEN
VERDE
4,5h - 5 h
100%
0%
When the green LED
turns on, the battery
has reached 100% ca-
pacity after about 4.5
hours.
11

Publicidad

Tabla de contenido
loading

Tabla de contenido