mothercare beech open Guia Del Usuario página 4

fig 5
fig 6
3
Attach the left side, using the
remainder of the 50mm bolts and
the Allen key.
Screw 4 cam pins into the holes in
the back of the drawer front.
Insert 2 cams into the holes near
the front edge of each drawer
front. Ensure that the arrows (X)
are pointing towards the front
edge.
X
fig 7
fig 8
fig 9
fig 10
Fit the holes in the front edges of
the sides over the cam pins, so
that the pins enter the cams. Note
that the grooves in the sides must
be facing inwards and must align
with those in the drawer front.
Using a screwdriver, turn the
cams clockwise, as far as you
can, in order to lock the joint.
Slide the drawer bottom into the
grooves in the drawer sides until
it sits completely in the groove in
the drawer front.
Fit the drawer back as shown,
allowing the 2 dowels in each
end to enter the corresponding
holes in the drawer sides. Ensure
that the drawer bottom slots into
the groove on the drawer back.
Secure with 2 short (40mm) bolts,
using the Allen key provided.
Hook the two wheels on each
side at the back of the drawer
over the wheels of the runners
attached to the dresser sides.
The drawer should glide in
smoothly.
4