Starrett W733.1 Manual Del Usuario página 12

FUNCTIONS
Wireless Functions
The new Wireless button (Fig.10) on the W733.1 Micrometer is used
for two functions; wireless on/off, and to change/reset a function in
profile mode.
1. You can turn the wireless "On" or "Off" by pressing and holding
the Wireless Radio Button for more than two seconds. The display
will change to the current wireless state either "On" or "Off"
(Fig.9A-B). When you release the button, the new state, either
"on" or "off" will be shown on the display. The tool will display
the new state for two seconds, and then the tool will revert back
to the current reading. You can tell that the wireless is on because
the wireless symbol will be visible on the display, Fig.11. To send
a reading press and release the Hold/Send button when the
wireless is enabled.
2. If you press and hold the Wireless button, you will go into the
functions mode and be able to change between three functions.
The tool will display either " On" or "Off" and then the current
function. If you continue to hold the Wireless button, and then
press the In/mm button, the tool will cycle through the functions
one at a time. When the desired function is displayed release the
Wireless button to select it.
12 PKG08861-UM733.1