Denon AVR-3802 Instrucciones De Operación página 6

ENGLISH
Connecting a Video Component Equipped with Color Difference (Component
- Y, P /C , P /C ) Video Jacks (DVD Player)
R R B B
• When making connections, also refer to the operating instructions of the other components.
• The signals input to the color difference (component) video jacks are not output from the VIDEO output jack
(yellow) or the S-Video output jack. In addition, the video signals input to the VIDEO input (yellow) and S-Video
input jacks are not output to the color difference (component) video jacks.
• The AVR-3802's on-screen display signals are not output from the color difference (component) video output
jacks (MONITOR OUT).
• Some video sources with component video outputs are labeled Y, C
terms all refer to component video color difference output.
DVD player
COMPONENT
VIDEO OUT
B
C C Y
R B
COMPONENT
VIDEO IN
Y C
B
6
All manuals and user guides at all-guides.com
, C , or Y, P , P , or Y, R-Y, B-Y. These
B R b r
Connecting a DVD player
DVD IN jacks
• Connect the DVD player's color difference (component)
video output jacks (COMPONENT VIDEO OUTPUT) to the
COMPONENT DVD IN jack using 75 Ω/ohms coaxial video
pin-plug cords.
• In the same way, another video source with component
video outputs such as a TV/DBS tuner, etc., can be connected
to the TV/DBS color difference (component) video jacks.
Monitor TV
Connecting a monitor TV
MONITOR OUT jack
• Connect the TV's color difference (component)
C
R
video input jacks (COMPONENT VIDEO INPUT)
to the COMPONENT MONITOR OUT jack using
75 Ω/ohms coaxial video pin-plug cords.
• The color difference input jacks may be indicated differently on some
TVs, monitors or video components ("C , C
R
"Pr, Pb and Y", etc.). For details, carefully read the operating instructions
included with the TV or other component.
Connecting the antenna terminals
75 Ω/ohms
COAXIAL
CABLE
FM ANTENNA
ADAPTER
(Supplied)
FM INDOOR
ANTENNA
(Supplied)
• An F-type FM antenna cable plug can be connected directly.
• If the FM antenna cable's plug is not of the F-type, connect using the included antenna adapter.
AM loop antenna assembly
and Y", "R-Y, B-Y and Y",
B
1 2
Remove the vinyl tie
and take out the
connection line.
4
a. With the
antenna on
top any
stable
surface.
b. With the
antenna
attached to
a wall.
Installation hole Mount on wall, etc.
DIRECTION OF
BROADCASTING
STATION
FM ANTENNA
300 Ω/ohms
FEEDER
CABLE
300 Ω/ohms
GROUND
FM antenna adopter assembly
Connect to the AM
antenna terminals.
Open the cover
3
Bend in the reverse
direction.
PULL
ANTENNA ADAPTER
Mount
1. Push the
lever.
Notes:
• Do not connect two FM antennas
simultaneously.
• Even if an external AM antenna is used, do
not disconnect the AM loop antenna.
• Make sure AM loop antenna lead terminals
do not touch metal parts of the panel.
AM LOOP
ANTENNA
(Supplied)
AM OUTDOOR
ANTENNA
75 Ω/ohms COAXIAL CABLE
SHUT
PULL
CLAMP
CLAMP
REMOVE
3C-2V 5C-2V
CLAMP
Connection of AM antennas
2. Insert the 3. Return the
conductor. lever.