Temperature Station - lidl HG05124A-US-RX Manual De Instrucciones

Temperature station

Note: Before mounting the temperature station, please remove the
stand
on the wall.
Note: Use the included drilling template intended for marking the
drill holes.
Outdoor sensor
296586_1901_aur_Funk-Wetterstation_Content_US.indd 19
from the back. Mark the location of the hole (D 0.3 in / 8 mm)
6
Drill the hole with an electric drill.
Push the dowel
33
Using a crosshead screwdriver, screw the screw
anchor.
Hang the temperature station by placing the hanging slot
the screw.
Mark the location of the hole (D 0.3 in / 8 mm) on the wall.
Note: Use the included drilling template intended for marking
the drill holes.
into the drilled hole.
0.125 in/3 mm
0.125in / 0.3mm
0.3 in/8 mm
into the wall
32
on
4
US-EN 19
24.06.19 11:47