lidl HG05124A-US-RX Manual De Instrucciones página 18

Drill the hole with an electric drill.
Push the dowel
Using a crosshead screwdriver, screw the screw
anchor.
Hang the outdoor sensor by placing the hanging slot
screw.
Note: Never immerse the outdoor sensor in water and protect
from direct sunlight. Electronic devices may adversely affect the
wireless signal reception.
Once the main station has received the signal from the outdoor sensor
and the WWVB signal, it enters into basic mode.
In base mode the main station will display the following information:
20 US-EN
296586_1901_aur_Funk-Wetterstation_Content_US.indd 20
0.125 in/3 mm
0.125in / 0.3mm
into the drilled hole.
33
0.3 in/8 mm
into the wall
32
on the
19
24.06.19 11:47